HIGH QUALITY DRILLING FLUIDS
Offering a wide assortment of high quality bentonite drilling fluids, grouts, sealants, polymers, and additives, CETCO can help maximize your drilling efficiency and meet your needs in the field.
MAXIMUM DRILLING EFFICIENCY
CETCO is committed to bringing you innovative, cost-effective products that go beyond merely meeting your needs for all drilling related markets. We are dedicated to providing our customers the newest solutions in drilling product technology.
ACCU-VIS
LIQUID DRILLING FLUID POLYMER
ACCU-VIS is a liquid copolymer designed for fast field mixing, viscosity building, and clay/shale stabilization in aqueous drilling fluids. ACCU-VIS is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals – Health Effects.
RECOMMENDED USE:
ACCU-VIS can be used to inhibit clay and shale hydration, as well as an additive in bentonite drilling fluids to increase viscosity and lower fluid loss. It may also be used with BELLE/CETCO CRUMBLES to make a high solids grout. ACCU-VIS can also be used in drilled shafts. When added into SHORE PAC slurry.
ACCU-VIS instantly boosts the viscosity, for improved viscosity, fluid loss control, bit lubrication, and shale stabilization/ inhibition. Delivers instant viscosifying performance.
CHARACTERISTICS:
- 50% active ingredient
- Can be mixed directly in the borehole or excavation
- Eliminates clay and shale swelling, bit balling, and sticking problems
- Excellent additive with BELLE/CETCO CRUMBLES for a high solids grout
- Fast mixing
- Forms a tight, thin filter cake in unstable formations
- Improves loading and removal of spoils
- Improves skin friction
- Maintains borehole integrity in horizontal and vertically drilled holes
MIXING & APPLICATION:
When using ACCU-VIS, pre-treat mix water with SODA ASH to a pH above 8.5. Always mix bentonite first and then add ACCU-VIS. To breakdown ACCU-VIS, add 0.5 gallon (2.25 L) of household-strength (3%-5% active) sodium hypochlorite (bleach) per 100 gallons (454 L) of drilling fluid.
When using ACCU-VIS in a SHORE PAC slurry, pre-treat mix water with SODA ASH to a pH above 8.5. Always mix SHORE PAC first and then add ACCUVIS. To breakdown ACCU-VIS, add 1 gallon (3.8 L) of pool-grade (12%-15% active) sodium hypochlorite (bleach) per 1,000 gallons (3785 L) of SHORE PAC slurry.
PACKAGING
(44 lb (20 kg) pail, 32 per pallet. All pallets are plastic-wrapped).
CETCO DEFOAMER
CETCO DEFOAMER is a non-ionic silicone solution designed to reduce surface tension and break foam bubbles over a wide variety of conditions.
RECOMMENDED USE:
Defoam in various media encountered in waterwell, large diameter shaft holes, geothermal, and oilfield drilling.
CHARACTERISTICS:
- Compatible with fresh and saltwater systems
- Immediate defoaming action with long term defoaming prevention
- Non-flammable; safe for potable waterwells
- Reduces corrosions caused by entrained air in drilling fluids
MIXING & APPLICATION:
Surface/Pit Defoaming – Emit fine spray directly on foam
Slug Treatment – 1-2 pints per 1,000 gallons
(0.5-1 liters per 4 m3) drilling fluid
CETCO DEFOAMER can be conveniently mixed in a lawn and garden sprayer for easy application.
PACKAGING
38 lb (18.9 kg) pails, 32 per pallet. All pallets are plastic-wrapped.
GRANULAR GROUT
HIGH-SOLIDS GRANULAR BENTONITE GROUT
CETCO GRANULAR GROUT mixes into a smooth bentonite grout that has no lumps and pumps easily. CETCO GRANULAR GROUT is dust free, offers reduced friction going down the tremie pipe, and has a firm set-up with little settling. CETCO GRANULAR GROUT is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals – Health Effects.
RECOMMENDED USE:
CETCO GRANULAR GROUT is designed for grouting waterwells and monitoring wells, decommissioning abandoned wells and boreholes, and sealing closed-loop geothermal heat pump systems. It forms a low-permeability, flexible seal.
CHARACTERISTICS:
• Improved set-up time allows mixing flexibility and reduces settling
• Physically stable; will not flow through highly permeable soil
• Smooth consistency for improved pumping and handling
MIXING & APPLICATION:
WATERWELL – 20% SOLIDS
Add one 50 lb (22.7 kg) bag of CETCO GRANULAR GROUT to 24 gallons (91 liters) of freshwater to produce 3.5 ft3 (0.11 m3) of grout. Once mixed to proper consistency, grout should be pumped through a tremie pipe with a positive displacement pump from the bottom of the well up to the surface. Pumping should continue until grout at the surface reaches the initial mud weight of 9.4 lbs/gal (0.63 kg/m3).
GEOTHERMAL – 40% SOLIDS
Add one 50 lb (22.7 kg) bag of CETCO GRANULAR GROUT to 24 gallons (91 liters) of freshwater to produce 3.5 ft3 (0.11 m3) of grout. Once mixed to proper consistency, grout should be pumped through a tremie pipe with a positive displacement pump from the bottom of the well up to the surface. Pumping should continue until grout at the surface reaches the initial mud weight of 9.4 lbs/gal (0.63 kg/m3).
PACKAGING
(44 lb (20 kg) pail, 32 per pallet. All pallets are plastic-wrapped).
CETCO GROUT
HIGH-SOLIDS POWDERED BENTONITE GROUT
CETCO GROUT is a 20% solids, polymer-free, single-component, easy-to-use sodium bentonite grout available in powdered form. CETCO GROUT allows placement in a low viscosity state. CETCO GROUT is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals – Health Effects.
RECOMMENDED USE:
CETCO GROUT is designed for grouting waterwells and monitoring wells and for decommissioning abandoned wells and boreholes. It forms a low-permeability, flexible seal.
CHARACTERISTICS:
- Generates no heat during curing; will not damage casings
- Low permeability; laboratory results range from 1 x 10-7 to 1 x 10-8 cm/sec
- Physically stable; will not flow through highly permeable soil
- Protects the aquifer from surface water intrusion
- Remains flexible; maintains putty-like consistency over time
- Single bag for easy one-step mixing
MIXING & APPLICATION:
Add one 50 lb (22.7 kg) bag of CETCO GROUT to 24 gallons (91 liters) of freshwater to produce 3.5 ft3 (0.1 m3) of grout. Once mixed to proper consistency, CETCO GROUT should be pumped through a tremie pipe with a positive displacement pump from the bottom of the well up to the surface. Pumping should continue until the grout at the surface reaches the initial mud weight of 9.4 lbs/gal (0.63 kg/m3).
PACKAGING
50 lb (22.7 kg) bag, 48 per pallet. All pallets are plastic-wrapped.
CETCO MX-80
30-100 MESH BENTONITE
CETCO MX-80 is a granular bentonite product composed of dried bentonite clay with a typical size range between 30 and 100 mesh.
RECOMMENDED USE:
May be used as a casing seal, hole abandonment material, and for sealing earthen structures.
CHARACTERISTICS:
- Less than 10% moisture
- Provides a positive seal
- Re-hydrates easily
- Will not shrink or crack
MIXING & APPLICATION:
GROUTING MATERIAL
One 50 lb (22.5 kg) bag CETCO MX-80 to 24 gallons (91 liters) of water, yielding 3.5 ft3 (0.1 m3) per batch.
DRY SHALLOW ABANDONMENT
Pour required amount directly down borehole; hydrate with freshwater
Earthen Structure Seal
Normal treatment is 1-2 lbs ft3 (10-20 kg/m2), depending on soil type.
PACKAGING
50 lb (22.7 kg) bag, 48 per pallet. All pallets are plastic-wrapped.
CETCO TABLETS
BENTONITE TABLETS 1/4” (0.63 CM), 3/8” (0.95 CM), & 1/2” (1.27 CM)
CETCO TABLETS are organic free, high-swelling pure sodium bentonite. CETCO TABLETS are compressed into 1/4 (0.63 cm), 3/8” (0.95 cm), and 1/2” (1.27 cm) diameters. CETCO TABLETS are certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals – Health Effects.
RECOMMENDED USE:
CETCO TABLETS are designed for use in the groundwater monitoring industry to form a chemically resilient, low-permeability, flexible seal. CETCO TABLETS isolate screened intervals of monitoring wells and provide an excellent seal for abandoned boreholes. 1/4” (0.63 cm) CETCO TABLETS are ideal for tight annular spaces, while 3/8” (0.95 cm) and 1/2” (1.27 cm) CETCO TABLETS are useful for larger boreholes.
CHARACTERISTICS:
- Chemically stable. Results from EP Toxicity Metals Analysis are
below RCRA limits for hazardous constituents - Will swell to 10 to 15 times their dry volume when hydrated with
freshwater - Self-sealing; remain flexible when saturated and will re-hydrate
- Permeability range of 1 x 10-7 to 1 x 10-9 cm/sec
MIXING & APPLICATION:
For shallow applications, add CETCO TABLETS slowly and steadily to prevent blocking and bridging. For deep applications, CETCO TABLETS may be tremied into place. CETCO TABLETS are added and water or air is pumped down the tremie pipe, delivering the CETCO TABLETS to the desired depth quickly and accurately.
BULK DENSITY:
1/4” = 80.72 lbs/ft3; 3/8” = 79.42 lbs/ft3; 1/2” = 75.99 lbs/ft3
0.63 cm = 1.29 kg/L; 0.95 cm = 1.27 kg/L; 1.27cm = 1.22 kg/L
PACKAGING
50 lbs (22.7 kg) pail, 36 per pallet. All pallets are plastic-wrapped.
CLAY CUTTER
CLAY INHIBITOR
CLAY CUTTER is a concentrated, non-hazardous, proprietary clay inhibitor that can be used with either polymer or bentonite drilling fluid systems. CLAY CUTTER is an ideal additive for HDD bores in reactive clay soils.
RECOMMENDED USE:
CLAY CUTTER is to be used on any size HDD bore. Using CLAY CUTTER will greatly reduce or eliminate clay cuttings from sticking to each other and to the drilling tools. Swelling of the bore will be reduced or eliminated. Rotation and pullback pressures will be significantly reduced.
CHARACTERISTICS:
- Greatly reduces clay rings and bit balling
- Increases returns back to the surface
- Non-hazardous
- Readily dispersible
- Reduces pullback pressures
- Reduces torque
- Will not significantly alter yield point or filtrate
MIXING & APPLICATION:
Add CLAY CUTTER to the drilling fluid system last. For sticky and swelling clays use 0.5 to 1 gallon per 1,000 gallons (0.5L – 1L per 1,000L) depending on water sensitivity of the formation. For maximum effectiveness, CLAY CUTTER should be used starting with the pilot hole and all reaming and pullback stages. Clays begin swelling and absorbing water immediately upon contact with water starting
with the pilot hole. CLAY CUTTER will eliminate or greatly reduce this problem.
PACKAGING
42 lb (18.9 kg) pail, 32 per pallet and ~465 lb (209 kg) drum, 4 per pallet. All pallets are plastic-wrapped.
CLAY CUTTER PRO
DRY CLAY INHIBITOR
CLAY CUTTER PRO is a concentrated, non-hazardous, proprietary clay inhibitor that can be used with either polymer or bentonite drilling fluid systems. CLAY CUTTER PRO is an ideal additive for HDD bores in reactive clay soils.
RECOMMENDED USE:
CLAY CUTTER PRO is to be used on any size HDD bore. Using CLAY CUTTER PRO will greatly reduce or eliminate clay cuttings from sticking to each other and to the drilling tools. Swelling of the bore
will be reduced or eliminated. Rotation and pullback pressures will be significantly reduced.
CHARACTERISTICS:
- Greatly reduces clay rings and bit balling
- Increases returns back to the surface
- Non-hazardous
- Readily dispersible
- Reduces pullback pressures
- Reduces torque
- Will not significantly alter yield point or filtrate
MIXING & APPLICATION:
Add CLAY CUTTER PRO to the drilling fluid system last. For sticky and swelling clays use 0.5 to 2 lbs per 1000 gallons (125g to 250 g per 1,000L) depending on water sensitivity of the formation. For maximum effectiveness, CLAY CUTTER PRO should be used starting with the pilot hole and all reaming and pullback stages. Clays begin swelling and absorbing water immediately upon contact with water starting with the pilot hole. CLAY CUTTER PRO will eliminate or greatly reduce this problem.
PACKAGING
20 lb (9 kg) pail, 48 per pallet. All pallets are plastic-wrapped.
DE-CHLOR
DECHLORINATION ADDITIVE
DE-CHLOR is a white granular crystal that neutralizes chlorine in municipal water. Chlorine in water supplies can destroy polymer drilling fluids.
RECOMMENDED USE:
Pre-treat make-up water with DE-CHLOR prior to mixing polymer drilling fluids to prevent premature breakdown, as well as to extend the yield and recycle life of polymer slurries.
CHARACTERISTICS:
- Boosts performance up to 50% without adding primary polymer
- Economical method for neutralizing chlorine
- Increases slurry life
- Stops chlorine from destroying polymer slurries
MIXING & APPLICATION:
Add 0.5 lb DE-CHLOR per 1,000 gallons (0.25 kg DE-CHLOR per 3.8 m3) make-up water either through a VENTURI HOPPER or by sprinkling into the flow of water filling the borehole. Mix DE-CHLOR at the same time SODA ASH is added to the make-up water.
PACKAGING
50 lb (22.7 kg) pails, 32 per pallet. All pallets are plastic-wrapped.
DRILL-TERGE
DRILLING DETERGENT/WETTING AGENT
DRILL-TERGE is a liquid solution of nonionic surfactants formulated to increase detergency and wetting properties of drilling fluids.
RECOMMENDED USE:
Designed to control interfacial tension and inhibit the hydration and dispersion of clay and shale.
CHARACTERISTICS:
- Assists in keeping the drill bit clean and prevents bit balling
- Designed to work in fresh or saltwater
- Mixes very easily
- Promotes settling of clays at the reserve pit/tank
- Reduces torque and drag associated with drilling in swelling clays
MIXING & APPLICATION:
Add 0.5 – 0.75 quarts (1-4 liters) of DRILL-TERGE per 100 gallons (per 1000 L) of existing bentonite drilling fluid.
PACKAGING
45 lb (20.25 kg) pail, 48 per pallet, or ~495 lb (224.5 kg) drum,
4 per pallet. All pallets are plastic-wrapped.
HURCUL-EZ
EXTREME SOLIDS SUSPENSION FLUID
HERCUL-EZ is a proprietary additive that is used in conjunction with bentonite based drilling muds. With proper formulation, the system will produce a unique drilling fluid with excellent shear thinning characteristics. At low shear or at rest, the fluid will gel and allow for suspension of large cuttings, yet thins immediately under pumping conditions. At rest, HERCUL-EZ fluid looks and behaves like a semisolid, but when sheared, even slightly, will revert back to a thin, almost water-like consistency. HERCUL-EZ is designed to be compatible with CETCO bentonite-based drilling fluids. HERCUL-EZ is NSF/ANSI Standard 60, Drinking Water Treatment Chemicals – Health Effects.
RECOMMENDED USE:
Ideal for difficult-to-drill applications such as large river crossings or in gravel/cobble. The extreme shear-thinning nature is well suited for mud recycling systems and for situations where excessive flow rates and pump pressures are to be avoided. DO NOT USE WITH ANIONIC ADDITIVES SUCH AS PAC’S, PHPA’S, AND THINNERS. applications including GSHP loop installation, minerals exploration, pipeline, sewer, communications installation, and waterwell construction
CHARACTERISTICS:
- Extreme solids suspension capable of supporting and moving
sand, gravel, and cobbles - Helps prevent formation bridging and blockage due to settling of
drill-cuttings - Lower pump pressures can reduce the likelihood of frac-outs
- Unique filter cake means that fluid is contained in borehole, even
when drilling through gravel and cobbles - Ideal for use with recycling systems as it will not blind screens
- Flow profile is plug-like for more complete borehole sweeping. Thinning only occurs at the borehole walls and drill-stem
MIXING & APPLICATION:
DO NOT USE WITH ANIONIC ADDITIVES SUCH AS PAC’S, PHPA’S, AND THINNERS
Pretreat freshwater to achieve a pH of 10 or higher. Add bentonite and allow to hydrate for at least 20 minutes before adding HERCUL-EZ. Add HERCUL-EZ and mix for 5 to 20 minutes before pumping. It is important to allow adequate pre-hydration of the bentonite in order to maximize performance of this system.
PACKAGING
25 lb (11.4 kg) bags, 80 per pallet. All pallets are plastic-wrapped.
HYDRAUL-EZ
HORIZONTAL DIRECTIONAL DRILLING FLUID
HYDRAUL-EZ is a high-yield, 200 mesh sodium bentonite with a special dry polymer additive. It is designed to maintain borehole integrity in horizontally drilled boreholes. HYDRAUL-EZ is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals – Health Effects.
RECOMMENDED USE:
HYDRAUL-EZ is specially designed for conditions encountered in angle and horizontal drilling. It can be used for all types of freshwater mud rotary drilling and as a jacking lubricant.
CHARACTERISTICS:
- Concentrated for high yield
- Eliminates clay and shale swelling, bit balling, and sticking problems
- Forms a tight, thin filter cake in unstable formations
- Maintains borehole integrity in horizontal and vertically drilled holes
- Mixes quickly
- Requires less material due to low fluid loss properties
MIXING & APPLICATION:
Mixing ratios are based on the use of freshwater. Water purity will affect bentonite performance. For best results, make-up water should be pre-treated with SODA ASH to a pH of 8.5-9.5. HYDRAUL-EZ should be added slowly through a jet/hopper mixer.
PACKAGING
50 lbs (22.7 kg) bags, 48 per pallet. All pallets are plastic-wrapped.
INSTA-CLEAR DRY
REACTIVE SEPARATING AGENT
INSTA-CLEAR DRY is designed to lower pH, break emulsions, and remove high levels of suspended solids. INSTA-CLEAR DRY is a specially blended dry granular product designed for both polymer slurry and water filled boreholes. When added into either type, INSTA-CLEAR DRY reacts instantly to settle suspended solids and decrease turbidity. INSTA-CLEAR DRY can be added at the tank, or directly to the excavation prior to clean-out. INSTA-CLEAR DRY clears the slurry rapidly of silt and sand build-up. It works fast for water sampling and downhole filming.
RECOMMENDED USE:
WATER SLURRY FOR DOWNHOLE FILMING
Flocculation of suspended fines cuts the turbidity (cloudiness) of water slurry, allowing for the improved clarity of downhole camera inspections. The resulting images provide a better visual inspection of soil or rock strata and verification of a clean, sound bottom required for end bearing shafts. INSTA-CLEAR DRY also eliminates sediment buildup on the rebar cage and on the bottom of the shaft by instantly settling fines and suspended solids for removal before placement of the cage.
POLYMER SLURRY
INSTA-CLEAR DRY is designed to remove high levels of suspended solids, lower pH, and break polymer emulsions. It is ideally suited for totally cleaning polymer slurry for disposal. INSTA-CLEAR DRY lowers the pH back to a neutral pH of 7-8 and lowers the viscosity back to 28- 32 sec/qt. INSTA-CLEAR DRY can be used to break the slurry in place of sodium hypochlorite (bleach). INSTA-CLEAR DRY added directly into an excavation in unstable sand and gravel should be done with caution, as INSTA-CLEAR DRY flocculates the pearls of polymer along with the suspended solids.
CHARACTERISTICS:
- Instant and rapid settling of suspended solids
- Lowers pH & viscosity for disposal of polymer slurry
- Dry formula is safe, salt tolerant, and easy to use
MIXING & APPLICATION:
TANK
To mix, slowly sift INSTA-CLEAR DRY into a flowing stream of water or polymer slurry. Circulate contents of the slurry tank with a centrifugal or diaphragm pump for 10 minutes. When added directly into the borehole or mud pit, stir and mix the slurry with the drilling tool for 5 minutes then prepare to clean-out the bottom of the borehole. Add 40 lbs (18 kg) (1 pail) of INSTA-CLEAR DRY per 3,000 gallons (11 m3) of polymer slurry. For fresh or saltwater use 1 lb per 75 gallons (0.45 kg per 284 liters) of water in the borehole.
EXCAVATION
Pre-mix in 5 gallon pails for best results @ 10 lbs per 5 gallon mix until dissolved. When added directly into the borehole, stir and mix the slurry with the drilling tool for 5 minutes then clean-out the bottom of the borehole.
CAMERA INSPECTION OF WELLS
When using INSTA-CLEAR DRY to clarify water/remove suspended solids in a well before running a camera, first calculate the volume of water in the well and determine the appropriate dosage based on the estimated volume of water. A 40 lb (18 kg) pail of INSTA-CLEAR DRY is sufficient for 3,000 gallons (11 m3) of water, or about 0.0133 lbs per gallon (0.14 kg/liter)
Example: 8” well with 300 ft of water:
8” borehole is 2.61 gal/ft x 300 ft = 783 gallons
783 gallons x 0.0133 lbs = 10.4 lbs of INSTA-CLEAR DRY
Example: 20 cm diameter well with 90 meters of water:
20 cm borehole is 32.4 l/m x 90 m = 2.97 m3
2.97 m3 x 0.14 kg/l = 4.7 kg of INSTA-CLEAR DRY
Take half the required amount of INSTA-CLEAR DRY and mix it in a 5 gallon (20 liter) pail of water and pour it down the well. Mix the other half of the product and pour it downhole. Wait approximately 5 min and pour in 10 to 15 gallons (40-50 liters) of clean water to flush the casing. Let the well stand for approximately 1 hour, and then send the camera down for inspection of the well.
PACKAGING
40 lb pail, 32 per pallet. All pallets are plastic-wrapped
INSTA-FLOC
NON-IONIC FLOCCULANT
INSTA-FLOC is a high performance selective liquid flocculant used in clear water drilling and low solids drilling. INSTA-FLOC is a high molecular weight, non-ionic polyacrylamide and is extremely effective in removing fine-grained solids suspended in the slurry.
RECOMMENDED USE:
Designed to separate and settle out fine grains trapped within a viscous slurry.
CHARACTERISTICS:
- Mixes easily in fresh or saltwater
- Rapidly settles free-floating fines
- Salt tolerant
- Yields rapidly
MIXING & APPLICATION:
INSTA-FLOC can be added directly into a stream of water at an excavation site or through a venturi type mixer to a surface tank. For best results, pre-mix a 0.5% solution of INSTA-FLOC in a 55 gallon drum (208 Liters) before adding it to the slurry system.
PACKAGING
5 gallon pail, 32 pails per pallet or 55 gallon drums All pallets are plastic-wrapped.
INSTA-VIS DRY
DRY DRILLING FLUID POLYMER
INSTA-VIS DRY is an easy mixing, water soluble, high molecular weight anionic polymer. This granular polymer improves drilling efficiency in both horizontal and vertically drilled holes by controlling shales and clays, improving lubricity, and increasing viscosity.
RECOMMENDED USE:
Designed for use as a drilling fluid polymer for improved viscosity, fluid loss control, bit lubrication, and shale stabilization/inhibition. INSTA-VIS DRY can be mixed into SUPER GEL-X or HYDRAUL-EZ slurries for use in vertical or horizontal drilling applications. INSTA-VIS DRY can be used in many drilling applications including GSHP loop installation, minerals exploration, pipeline, sewer, communications installation, and waterwell construction.
CHARACTERISTICS:
- Disperses easily with moderate shear in freshwater
- Flocculates non-reactive solids in reserve pit
- High lubricity reduces torque
- Inhibits sticky clay and shale from swelling and bit balling
- Maintains borehole integrity in both horizontal and vertical holes
- Works in SUPER GEL-X and HYDRAUL-EZ slurries
- Can be used with a variety of CETCO additives
- Works well with DRILL-TERGE to eliminate sticky clay
- Excellent for building stiff foam drilling fluids with VERSA FOAM PLUS
MIXING & APPLICATION:
ADDED TO FRESHWATER: Add 2 to 8.5 pounds per 1,000 gallons of water and mix for 15 minutes to hydrate INSTA-VIS DRY. WATER QUALITY: The pH of the make-up water should be maintained between 7-10. If make-up water is below this range add 0.5 to 1 pound of SODA ASH per 100 gallons of make-up water.
PACKAGING
14 lb (6.3 kg) pail, 60 per pallet. All pallets are plastic-wrapped.
INSTA-VIS PLUS
LIQUID DRILLING FLUID POLYMER
INSTA-VIS PLUS is a multi-functional liquid polymer designed to improve drilling efficiency in both horizontal and vertical drilled holes through its rapid field mixing, viscosity development, and clay and shale inhibition. INSTA-VIS PLUS is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals – Health Effects.
RECOMMENDED USE:
Designed for use as a drilling fluid polymer for improved viscosity, bit lubrication, and shale stabilization/inhibition. Can be mixed into SUPER GEL-X or HYDRAUL-EZ slurries for use in vertical or horizontal drilling applications. INSTA-VIS PLUS can be used in many drilling applications including GSHP loop installation, minerals exploration, pipeline, sewer, communications installation, and waterwell construction
CHARACTERISTICS:
- Can be used with VERSAFOAM PLUS to produce a stiff foam
- Eliminates clay and shale swelling, bit balling, and sticking
- Flocculates non-reactive solids in reserve pit
- High lubricity reduces torque
- Maintains borehole integrity in both horizontal and vertical holes
- Quick mixing and rapid yield in freshwater
MIXING & APPLICATION:
Adjust mix water pH to above 7.0 to maximize product performance. Always mix bentonite first, then add INSTA-VIS PLUS at a slow, steady rate. To breakdown INSTA-VIS PLUS, add 0.5 lb (0.25 kg) of sodium hypochlorite (bleach) per 100 gallons (380 liters) of drilling fluid.
PACKAGING
42 lb (19.05 kg) pail, 32 per pallet. All pallets are plastic-wrapped.
MACRO-FILL
ACID SOLUBLE LCM AND SWEEP MATERIAL
MACRO-FILL is a granular, advanced super-absorbent material that rapidly absorbs and retains large volumes of water from aqueous solutions. MACRO-FILL may absorb up to 300 times its weight in freshwater while expanding less than 5% in total volume.
RECOMMENDED USE:
MACRO-FILL is ideally suited for solidification and stabilization of drilling fluids, wastewater, and sludge. MACRO-FILL is also a superior loss circulation material.
CHARACTERISTICS:
- Absorbs 300 times its own weight in water
- Can be added directly into drilling fluid
- Can be used with other lost circulation materials
- Expands approximately 5% in volume with maximum absorption
- Seals large and fine fractures and highly permeable and porous
formations - Will not harm pumping equipment
MIXING & APPLICATION:
When using ACCU-VIS, pre-treat mix water with SODA ASH to a pH above 8.5. Always mix bentonite first and then add ACCU-VIS. To breakdown ACCU-VIS, add 0.5 gallon (2.25 L) of household-strength (3%-5% active) sodium hypochlorite (bleach) per 100 gallons (454 L) of drilling fluid.
When using ACCU-VIS in a SHORE PAC slurry, pre-treat mix water with SODA ASH to a pH above 8.5. Always mix SHORE PAC first and then add ACCUVIS. To breakdown ACCU-VIS, add 1 gallon (3.8 L) of pool-grade (12%-15% active) sodium hypochlorite (bleach) per 1,000 gallons (3785 L) of SHORE PAC slurry.
PACKAGING
14 lb pail, 48 per pallet. All pallets are plastic-wrapped.
MAGMA FIBER FINE
ACID SOLUBLE LCM AND SWEEP MATERIAL
MAGMA FIBER, manufactured by Lost Circulation Specialists, Inc., is a specially formulated, extrusion spun mineral fiber. This coarse, long flexible fiber will give increased circulation by bridging and plugging off voids, fractures, and all types of permeable formations. MAGMA FIBER is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals – Health Effects.
MAGMA FIBER is compatible with all oil and water based muds and emulsion. The interlocking nature of these strong fibers provides a framework for forming a low permeable mud cake with a resultant reduction in drilling fluid loss and hole caving. Low alkaline, flexible, inorganic MAGMA FIBER is inert to drilling fluids. This fiber is noncorrosive to equipment while maintaining high-solubility diluted hydrochloric acid. It is particularly adaptable to rework operations.
MAGMA FIBER is coated with a mono-molecular film of a specially formulated surfactant (that speeds separation of the fibers), then formed into nodules. These nodules are formed into loosely connected
groups so that when they are immersed in drilling fluids and subjected to agitation the nodules separated into the individual fibers. Acid soluble, easily wetted, non-combustible, non-fermenting, inorganic, non-polluting, non-corrosive, non-toxic, temperature stable, and contains no asbestos.
RECOMMENDED USE:
MAGMA FIBER can be used in concentrations of up to 30+ lb/bbl (15+ kg/bbl) in slug treatments or as additive to entire system. MAGMA FIBER has been used in concentrations of 1/2 bag every 30 minutes for ongoing seepage, to concentrations of 5-15 lb/bbl (2.5-7 kg/bbl) for seepage/partial or total losses. MAGMA FIBER is particularly suitable for oil base mud. When more than 6-10 bags are mixed at once, a man should be at the shaker screen when the slug comes around (to clean or bypass the shaker screen). MAGMA FIBER can be used in all oil and water base mud systems. MAGMA FIBER should be added directly into pits and gunned Into the mud, it can be mixed through the mud hopper but it is much slower.
LIMITATION:
When acid solubility is not important, a combination of materials can be added to ensure a good particle size distribution.
PACKAGING
25 lb (11.25 kg) bag, 48 per pallet. All pallets are plastic-wrapped
MULTI-SEAL
BLENDED LOST CIRCULATION MATERIAL
MULTI-SEAL is a select blend of four types of materials normally used for lost circulation. A flake material (cellophane), a granular material (nut shells), fine fibrous material (ground paper), and coarse fibers (cedar fibers). MULTI-SEAL is blended in the proper ratio to produce the most effective seal. MULTI-SEAL contains no fermenting materials or materials that chemically change the rheological properties of the fluid,
RECOMMENDED USE:
MULTI-SEAL is used to stop the most costly loss returns which are the unexpected. MULTI-SEAL plugs formations that contain fractured sandstones, unconsolidated or highly permeable formations, natural fractures or voids, and cavernous type loss zones. MULTI-SEAL is specially formulated for all loss circulation conditions.
CHARACTERISTICS:
- Assists in forming a fast effective bridge
- Blended to have the proper particle size for maximum plugging
- Most effective loss circulation material available
- Regains circulation quickly
MIXING & APPLICATION:
MULTI-SEAL concentrations will vary in different type fluids depending on weight and viscosity. As a preventive measure in concentrations of 2-10 lbs per 200 gallons (1-5 kg per 750 liters). As a “pill” mixed with the mud being used at concentrations of 15-20 lbs per 200 gallons (7.50-10 kg per 750 liters). These are recommendations only. The concentrations will vary depending on the mud weight, viscosity, and type of loss circulation involved.
PACKAGING
40 lb (18 kg) bag, 60 per pallet. All pallets are plastic-wrapped.
PREMIUM GEL
API BENTONITE
PREMIUM GEL is a 200 mesh, 90 bbl yield sodium bentonite for freshwater drilling, slurry walls, and tunnel boring. PREMIUM GEL complies with API 13A Section 9, Specifications for Drilling Fluid Materials. PREMIUM GEL is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals – Health Effects.
RECOMMENDED USE:
May be used for all types of freshwater mud rotary drilling where higher solids are desired. PREMIUM GEL can also be used as a seal for earthen structures, slurry trenching, tunnel boring, and foundation drilling.
CHARACTERISTICS:
- Cools and lubricates bit
- Mixes quickly and easily
- Reduces fluid loss into the formation
- Removes cuttings
- Stabilizes borehole
MIXING & APPLICATION:
Mixing ratios are based on the use of freshwater; water purity will affect bentonite performance. For best results, acidic and hard makeup water should be pretreated with SODA ASH to a pH of 8.5-9.5. Add PREMIUM GEL slowly through jet/hopper mixer.
PACKAGING
50 lb (22.7 kg) bag, 48 per pallet, 100 lb (45.4 kg) bag, 35 per pallet, 1
ton or 2 ton supersacks, or bulk. All pallets are plastic-wrapped.
PUREGOLD CLEANDRILL
BIODEGRADABLE DRILLING FLUID
PUREGOLD CLEANDRILL is a bentonite free powder designed for special conditions associated with drilling horizontal directional recovery wells for groundwater remediation. PUREGOLD CLEANDRILL maintains formation permeability and porosity
RECOMMENDED USE:
PUREGOLD CLEANDRILL is designed for use in drilling operations where bentonite based drilling fluids are restricted and a biodegradable drilling fluid is recommended.
CHARACTERISTICS:
- Decreases filtration rate in unconsolidated formations
- Elevated yield point and gel strength for efficient cutting suspension
and transport - Enhanced viscosity for efficient borehole cleaning
- Improved borehole stability for easy well installation
- Increases recovery rate of contaminants during remediation
- Preserves porosity and permeability of formation
- Soluble in water, and disperses easily with moderate shear
MIXING & APPLICATION:
PUREGOLD CLEANDRILL is compatible with a wide range of make-up waters. Add slowly and uniformly through a high shear jet-type mixer over one or more cycles of the volume of slurry. Continue to mix and agitate the slurry until all ingredients are dispersed. PUREGOLD CLEANDRILL breaks down chemically by adding calcium hypochlorite or LEB-CD.
NORMAL CONSOLIDATED FORMATIONS
8 to 15 pounds per 100 gallons water (3.5 to 6.5 lbs/bbl)
3.5 to 7 kg per 380 liters water (1.5 to 3.5 kg/bbl)
UNCONSOLIDATED FORMATIONS
12 to 27 pounds per 100 gallons water (5 to 9 lbs/bbl)
5.5 to 12 kg per 380 liters water (2.5 to 4 kg/bbl)
PACKAGING
50 lb (22.7 kg) bag, 40 per pallet. All pallets are plastic-wrapped.
PUREGOLD GROUT
HIGH-SOLIDS GROUT
PUREGOLD GROUT is an easy mixing, organic-free, high-solids bentonite grout engineered to form a contaminant resistant seal without affecting groundwater chemistry. PUREGOLD GROUT is a technically superior replacement for traditional cement grouts. PUREGOLD GROUT is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals – Health Effects.
RECOMMENDED USE:
PUREGOLD GROUT should be used for sealing the annular space in monitoring wells to control contaminate infiltration and preserve ambient groundwater quality.
CHARACTERISTICS:
- Chemically stable. Results from TCLP Metals Analysis are below RCRA limits for hazardous constituents
- Contaminant free. All 116 priority pollutants tested for were below TCLP detection limits
- Generates no heat during mixing or curing and will not damage well casing
- Low permeability, laboratory test results range from 1×10-7 to 1×10-9 cm/sec
- pH range from 5-6 standard units
- Remains flexible, maintains putty-like consistency over time and will re-hydrate
- Thermal Conductivity 0.45 Btu/hr/ft/F (0.75 watts/meter K)
MIXING & APPLICATION:
PUREGOLD GROUT should be mixed with a paddle mixer or a mud rotary recirculation system and pumped with a positive displacement pump. It can be mixed in a slurry up to 30% solids. PUREGOLD GROUT remains placeable for up to two hours and sets in eight hours. To achieve a 30% solids slurry, add one 50 lb bag of grout to 14 gallons (22.7 kg bag of grout to 53 liters) of freshwater. This ratio will yield approximately 2.2 ft3 (62.2 liters).
PACKAGING
50 lb (22.7 kg) bag, 48 per pallet. All pallets are plastic-wrapped.
PUREGOLD LUBE
PREMIUM GRADE LUBRICANT
PUREGOLD LUBE is an environmentally safe premium grade lubricant, free of petroleum hydrocarbons and metals. PUREGOLD LUBE is a tool joint lubricant designed for use in environmental drilling.
RECOMMENDED USE:
PUREGOLD LUBE is used to lubricate threads on drill rod stems, auger bolts, and sampling devices. Helps prevent seizing and reduces thread wear. PUREGOLD LUBE may also be used to lubricate other tools and
instruments used in environmentally sensitive applications.
CHARACTERISTICS:
- Chemically stable
- Easily removed during decontamination
- Maintains sample integrity
- Provides maximum protection to the drill string
- Reduces friction and helps prevent seizing
- Reduces thread wear
- Remains workable in cold temperatures
- Washout resistant
MIXING & APPLICATION:
PUREGOLD LUBE should be applied liberally onto threads using a stiff brush. After joint is tightened, excess or extruded material should be removed.
PACKAGING
8 lb (3.6 kg) plastic pails, 100 per pallet. All pallets are plastic-wrapped.
PUREGOLD MEDIUM CHIPS
HOLE ABANDONMENT MATERIAL
CETCO COARSE CHIPS are natural sodium bentonite screened to 3/8 inch (0.95 cm) to 3/4 inch (1.90 cm) in size. PUREGOLD MEDIUM CHIPS are natural sodium bentonite screened to 1/4 inch (0.64 cm) to 3/8 inch (0.95 cm) in size. CETCO COARSE CHIPS and PUREGOLD MEDIUM CHIPS are certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals – Health Effects.
RECOMMENDED USE:
Sealing shallow boreholes and seismic shot holes; decommissioning wells; providing an interface between gravel pack and bentonite or cement grout.
CHARACTERISTICS:
- Chemically stable. Results from TCLP Priority Pollutants analysis are
below RCRA limits for hazardous constituents - Prevent infiltration of surface contamination
- Provide a high-solids bentonite seal
- Provide a permanent, flexible seal
MIXING & APPLICATION:
Because chips may develop fines during transporting and handling, bagged material should be screened of fines before placement. Pour chips slowly downhole to prevent bridging or binding In unsaturated conditions, water should be added at 2 ft intervals to ensure adequate hydration.
PACKAGING
50 lb (22.7 kg) bag, 48 per pallet. All pallets are plastic-wrapped.
REL-PAC
NATURAL CELLULOSIC POLYMER
REL-PAC is a non-fermenting granular polymer designed for building a low solids drilling fluid with increased borehole stability. REL-PAC is a highly dispersible polymer, which prevents the formation of hard lumps or fish eyes, for maximum product efficiency.
RECOMMENDED USE:
REL-PAC is designed to increase borehole stability in a variety of rotary and horizontal drilling applications.
CHARACTERISTICS:
- Controls filtration rate and assists in forming thinner, less permeable filter cake
- Encapsulates solids for a total lower solids system
- Highly dispersible
- Improves fluid viscosity for effective removal of drill cuttings
- May be used in fresh or saltwater conditions
- Stabilizes drilled formations
MIXING & APPLICATION:
Mix at low shear through a mud hopper to avoid lumping and to minimize waste. Add 0.5 to 1.5 pounds (0.25 to 1 kg) of REL-PAC per 100 gallons (380 liters) of existing bentonite drilling fluid for hole stabilization. Dosage scoop included is equivalent to 1/2 lb.
PACKAGING
25 lb pail (11.3 kg) with dosage scoop, 36 per pallet or 50 lb bag (22.7 kg) 40 per pallet. All pallets are plastic-wrapped.
REL-PAC XTRA-LOW
DRY POLYANIONIC CELLULOSIC POLYMER
REL-PAC XTRA-LOW is a low viscosity, non-fermenting dry polymer designed for use as a more efficient filtration control additive in a variety of drilling fluid applications. Intended for use in bentonite and polymer fluids.
RECOMMENDED USE:
REL-PAC XTRA-LOW will help increase borehole stability by lowering filtrate and fluid loss more effectively than other PAC’s. REL-PAC XTRALOW aids cleaning by not significantly raising viscosities and impeding flow. Helps control reactive formations by reducing available water and controls unconsolidated formations by reducing whole fluid loss.
CHARACTERISTICS:
- Controls filtration rates and helps form a thin flexible wall cake
- For use in fresh and saltwater systems
- Highly dispersible
- Only moderate viscosity increase for increased flow
- Stabilizes many types of drilled formations
MIXING & APPLICATION:
Mix at high shear through a venturi hopper to avoid fish eyes, clumping, and to avoid waste. Add 0.5–1.5 lbs (0.25 to 1.0 kg) of REL-PAC XTRA-LOW per 100 gallons (380 liters) of existing bentonite drilling fluid for hole stabilization. Dosage scoop included is equilvilant to 1/2 lb.
PACKAGING
25 lb pail (11.3 kg) with dosage scoop, 36 per pallet or 50 lb bag (22.7 kg) 40 per pallet. All pallets are plastic-wrapped.
MULTI-SEAL
BLENDED LOST CIRCULATION MATERIAL
MULTI-SEAL is a select blend of four types of materials normally used for lost circulation. A flake material (cellophane), a granular material (nut shells), fine fibrous material (ground paper), and coarse fibers (cedar fibers). MULTI-SEAL is blended in the proper ratio to produce the most effective seal. MULTI-SEAL contains no fermenting materials or materials that chemically change the rheological properties of the fluid,
RECOMMENDED USE:
MULTI-SEAL is used to stop the most costly loss returns which are the unexpected. MULTI-SEAL plugs formations that contain fractured sandstones, unconsolidated or highly permeable formations, natural fractures or voids, and cavernous type loss zones. MULTI-SEAL is specially formulated for all loss circulation conditions.
CHARACTERISTICS:
- Assists in forming a fast effective bridge
- Blended to have the proper particle size for maximum plugging
- Most effective loss circulation material available
- Regains circulation quickly
MIXING & APPLICATION:
MULTI-SEAL concentrations will vary in different type fluids depending on weight and viscosity. As a preventive measure in concentrations of 2-10 lbs per 200 gallons (1-5 kg per 750 liters). As a “pill” mixed with the mud being used at concentrations of 15-20 lbs per 200 gallons (7.50-10 kg per 750 liters). These are recommendations only. The concentrations will vary depending on the mud weight, viscosity, and type of loss circulation involved.
PACKAGING
40 lb (18 kg) bag, 60 per pallet. All pallets are plastic-wrapped.
SHORE PAC
VISCOUS SOIL STABILIZING POLYMER
SHORE PAC is an easy mixing, water soluble, polymer supplied as a granular powder. SHORE PAC is designed for preparation of viscous earth-reinforcing fluids or slurries for a variety of drilling, trenching, and walling applications in the geo-construction industry.
RECOMMENDED USE:
SHORE PAC is ideal for slurry trenching, diaphragm walls, drilled shafts/bored piles, and tunneling.
CHARACTERISTICS:
- Can be mixed directly in the borehole or excavation
- Stabilizes borehole while excavating; improves skin friction
- Non-gelling, even at high viscosities, facilitating settlement of
fines, and maintenance of a clean fluid - High cohesiveness to bind excavated soil and gravel
- Improves loading and removal of spoils
MIXING & APPLICATION:
SHORE PAC should be mixed by sifting carefully into a stream of water directed into the excavation or an agitator mix tank. Fanning the water stream over a sloping pan or across the blade of an auger facilitates lump-free mixing. If mixed directly in excavation, the tool should be reciprocated gently after product is added to distribute and homogenize the polymer. Make-up water should have a pH of 8-10; add 6 lbs SODA ASH per 1,000 gallons water.
PACKAGING
36 lb pail, 36 per pallet, 6-7.5 lb jugs – 45 lb case, 36 per pallet, or 55 lb bags, 40 per pallet.
SHORE PAC X
FLUID LOSS ADDITIVE
SHORE PAC X is a specially synthesized polymer nano composite designed for use as a loss circulation management product with SHORE PAC polymer slurry in drilled shaft foundations.
RECOMMENDED USE:
SHORE PAC X is an effective loss circulation management product intended to be used in porous soil conditions to help slow or eliminate fluid loss that is encountered during drilling.
CHARACTERISTICS:
- Reduce cost overruns related to fluid loss in highly permeable ground conditions
- Seals sand and gravel formations
- Less product required compared to conventional fluid loss additives
- Will not change skin friction qualities of SHORE PAC polymer slurry
- Most effective loss circulation material available
- Long shelf life
MIXING & APPLICATION:
Concentrations may vary depending on soil conditions. SHORE PAC X MUST HAVE AT A MINIMUM 30 MINUTES TO YIELD BEFORE DRILLING COMMENCES.
Mix 1.0 – 5.0 lbs SHORE PAC X per 1,000 gallons SHORE PAC polymer slurry. WAIT A MINIMUM OF 30 MINUTES, THEN COMMENCE DRILLING. For more efficient mixing use of a venturi style hopper/eductor is reccomended.
NOTE: In order to obtain a proper viscosity reading you must filter out the loss circulation material (LCM) or fluid loss additives from your support fluid prior to testing with the Marsh funnel. Marsh funnel values will be misleading when measuring the viscosity of a support fluid after the addition of a LCM product. Due to the nature of LCM’s, which are designed to plug the pore space between soil particles, they will reduce or stop fluid loss which results in a reduction or stoppage of flow through the orifice of the Marsh funnel.
PACKAGING
25 lb (11.4 kg) pail, 36 per pallet. All pallets are plastic-wrapped.
SLURRY BUSTER DRY
SHORE PAC POLYMER SLURRY BREAKER
SLURRY BUSTER DRY is an industrial grade oxidizing agent used to breakdown SHORE PAC polymer slurry. This white granular solid dissolves completely when applied to SHORE PAC polymer slurry. The active ingredient is a powerful class III oxidizer that ensures rapid and complete slurry degradation. SLURRY BUSTER DRY is supplied in plastic re-sealable pails. SLURRY BUSTER DRY is a highly effective clean-up solution.
RECOMMENDED USE:
SLURRY BUSTER DRY mixes rapidly into the drilling slurry and breaks the polymer backbone through an oxidation reaction. After treatment with SLURRY BUSTER DRY all that remains is water; ready for convenient disposal. SLURRY BUSTER DRY is designed to be added at the tank or waste pit but never to the excavation.
CHARACTERISTICS:
- No freeze concerns
- Maximum strength at 65% active ingredients
- Easy-to-use re-sealable pails
- Breaks slurry faster for quick, efficient disposal
- Soluble in water
- Will not decompose when stored of properly
MIXING & APPLICATION:
15 lbs of SLURRY BUSTER DRY per 10,000 gallons SHORE PAC polymer slurry. Circulate entire volume of slurry by pumping to ensure complete oxidation of polymer molecules. Note: For high viscosity slurry or slurry that has been pre-treated with DE-CHLOR a higher dosage of SLURRY BUSTER DRY may be necessary.
PACKAGING
30 lb pail, 36 per pallet. All pallets are plastic-wrapped.
SLURRYBOND
DRILLING FLUID SOLIDIFIER
SLURRYBOND is a powdered inorganic mineral formula used for the solidification of high solids drilling slurries. SLURRYBOND is made from a non-biodegradable mineral designed for use on waste slurry that fails to pass a Paint Filter Liquids Test (PFLT) or a slump test. SLURRYBOND will solidify waste slurry on the job site and allow waste to be transferred to the disposal site.
RECOMMENDED USE:
SLURRYBOND should be poured into or across the surface of the waste slurry pit. The SLURRYBOND can be stirred into the waste slurry with a backhoe or excavator.
CHARACTERISTICS:
- Dry powder
- Environmentally safe – does not alter mud chemistry
- Helps waste slurry pass a Toxicity Characteristic Leaching Procedure (EPA Method 1311)
- Reduces volume and weight over time
- Sets in 24-36 hours
- SLURRYBOND absorbs 7.5 times its own weight in water
- Works in a wide pH range and wide percent solids content
PACKAGING
50 lbs (22.7 kg) bags, 48 per pallet. All pallets are plastic-wrapped.
SLURRYBOND 200
DRILLING FLUID SOLIDIFIER
SLURRYBOND 200 is a proprietary solid, granular super-absorbent polymer that rapidly absorbs and retains aqueous matter. SLURRYBOND 200 is made from non-biodegradable polymer designed for use on waste slurry that fails to pass a Paint Filter Liquids Test (PFLT) or slump test.
RECOMMENDED USE:
SLURRYBOND 200 should be poured into or across the surface of the waste slurry pit. The SLURRYBOND 200 can be stirred into the waste slurry with a backhoe or excavator.
CHARACTERISTICS:
- Will not increase volume of waste being treated
- Helps waste slurry pass a Toxicity Characteristic Leaching Procedure (EPA Method 1311)
- Will not release liquids after freezing and reheating to 160°F
- Will not release trapped ionic contaminants if solute evaporation occurs
PACKAGING
50 lb (22.7 kg) bags, 40 per pallet. All pallets are plastic-wrapped
SLURRYBOND 2000
DRILLING FLUID SOLIDIFIER
SLURRYBOND 2000 is a powdered inorganic mineral and polymer formula used for the the solidification of high solids drilling slurries. SLURRYBOND 2000 is made from a non-biodegradable mineral and polymer mixture designed for use on waste slurry that fails to pass a Paint Filter Liquids Test (PFLT) or a slump test.
SLURRYBOND 2000 will solidify waste slurry on the job site and allow waste to be transferred to the disposal site.
RECOMMENDED USE:
SLURRYBOND 2000 should be poured into or across the surface of the waste slurry pit. The SLURRYBOND 2000 can be stirred into the waste slurry with a backhoe or excavator or applied with soil mixing equipment.
CHARACTERISTICS:
- Dry powder
- Environmentally safe – does not alter mud chemistry
- Helps waste slurry pass a Toxicity Characteristic Leaching Procedure (EPA Method 1311)
- Reduces volume and weight over time
- Sets in 1-36 hours
- Works in a wide pH range and wide percent solids content
PACKAGING
40 lbs (18.1 kg) bags, 60 per pallet. All pallets are plastic-wrapped.
SLURRYBOND 2000 G
DRILLING FLUID SOLIDIFIER
SLURRYBOND 2000 G is a powdered inorganic mineral and polymer formula used for the the solidification of high solids drilling slurries. SLURRYBOND 2000 G is made from a non-biodegradable mineral and polymer mixture designed for use on waste slurry that fails to pass a Paint Filter Liquids Test (PFLT) or a slump test.
RECOMMENDED USE:
SLURRYBOND 2000 G should be poured into or across the surface of the waste slurry pit. The SLURRYBOND 2000 G can be stirred into the waste slurry with a backhoe or excavator or applied with soil mixing equipment.
CHARACTERISTICS:
- Granular – reduces dust while mixing
- Environmentally safe – does not alter mud chemistry
- Helps waste slurry pass a Toxicity Characteristic Leaching Procedure (EPA Method 1311)
- Reduces volume and weight over time
- Sets in 1-36 hours
- Works in a wide pH range and wide percent solids content
PACKAGING
40 lbs (18.1 kg) bags, 60 per pallet, 2000 lb supersacks. All pallets are plastic-wrapped.
SODA ASH
SODIUM CARBONATE
SODA ASH is the common name for sodium carbonate, which separates calcium into sodium and carbonate ions in solution. SODA ASH is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals – Health Effects.
RECOMMENDED USE:
SODA ASH is used to raise the pH of make-up water for bentonite and polymer drilling fluids by precipitating soluble calcium. Using SODA ASH will increase the performance of bentonite and polymer drilling fluids.
CHARACTERISTICS:
- Easy to mix and use
- Economical method to increase pH
- Maximizes yield of drilling fluid
MIXING & APPLICATION:
SODA ASH should be added slowly through a hopper or chemical barrel. When using a barrel, mix SODA ASH into a full barrel of freshwater and provide adequate agitation. Add SODA ASH until pH of 8.5-9.5 is obtained. Suggested ratio is 0.33 to 0.5 lb per 100 gallons (0.25 kg to 0.5 kg per 380 liters) water.
PACKAGING
50 lb (22.7 kg) bags, 49 per pallet or 50 lb (22.7 kg) pails, 32 per pallet. All pallets are plastic-wrapped.
SUPER GEL X
HIGH YIELD BENTONITE
SUPER GEL-X is an easy mixing, high viscosity 200 bbl yield freshwater drilling fluid produced from the highest grade Wyoming sodium bentonite. SUPER GEL-X is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals – Health Effects.
RECOMMENDED USE:
May be used for all types of freshwater mud rotary drilling.
CHARACTERISTICS:
- Cools and lubricates bit
- Helps prevent loss circulation
- Highly concentrated for maximum yield
- Mixes quickly and easily
- Reduces solids and increases lifting power
- Removes cuttings
- Stabilizes boreholes
- Helps prevent loss circulation
MIXING & APPLICATION:
Mixing ratios are based on 200 bbl yield material using freshwater. Level of water purity will affect bentonite performance. Prior to mixing, acidic and hard water should be treated with SODA ASH to a pH of 8.5-9.5. For best results, add SUPER GEL-X slowly through a jet/hopper mixer.
PACKAGING
50 lb (22.7 kg) bags, 48 per pallet, 1 ton or 2 ton supersacks, or bulk. All pallets are plastic-wrapped.
SUPER PAC
DRILLING FLUID ENHANCER
SUPER PAC is an easy mixing, liquid polymer that enhances the properties of a bentonite drilling fluid. When added to HYDRAUL-EZ or SUPER GEL-X, SUPER PAC creates an ideal fluid for drilling in a variety of conditions.
RECOMMENDED USE:
This multifunctional polymer is designed for use as a drilling fluid additive for inhibition of clay and shale, minimizing fluid loss to the formation, and increasing viscosity for cuttings transport and suspension.
CHARACTERISTICS:
- Increases viscosity of drilling fluid
- Inhibits the hydration of clays and shale
- Provides filtration control in both fresh and saltwater
- Reduces fluid loss in permeable formations
MIXING & APPLICATION:
Mix at low shear through a mud hopper. Add 0.5 to 1 quart per 100 gallons (0.5 to 1.0 liter per 380 liters) of existing bentonite drilling fluid for hole stabilization.
PACKAGING
42 lb (19.1 kg) pail, 32 per pallet. All pallets are plastic-wrapped.
SUPER PAC XTRA-LOW
LIQUID POLYANIONIC CELLULOSIC POLYMER
SUPER PAC XTRA-LOW is a low viscosity, liquid multi-purpose polymer. SUPER PAC XTRA-LOW enhances the beneficial properties of bentonite and polymer drilling fluids.
RECOMMENDED USE:
This low viscosity polymer aids in the control of reactive and unconsolidated formations by reducing filtrate and whole fluid loss. SUPER PAC XTRA-LOW assists hole cleaning in HDD work and increases penetration rates in vertical wells by not significantly raising viscosities.
CHARACTERISTICS:
- Helps prevent hydration of shales and clays
- Highly dispersible and mixes at low shear
- Minimized viscosity increase for increased flow
- Reduces filtrate and fluid loss to reactive and permeable or unconsolidated formations
- Suitable for use in fresh and saltwater drilling fluids
MIXING & APPLICATION:
Mix directly into a well circulated mud pit or through venturi hopper. Add 0.5 to 1 quart per 100 gallons (0.5 to 1 liter per 380 liters) of existing bentonite drilling fluid for hole stabilization.
PACKAGING
42 lb (18.9 kg) pail, 32 per pallet. All pallets are plastic-wrapped.
SUPER THIN
DRILLING FLUID THINNER/DEFLOCCULANT
SUPER THIN is a highly concentrated additive engineered to reduce drilling fluid viscosity, assist in settling solids, and disperse the filter cake created by a bentonite drilling fluid. It offers immediate thinning action, reduces gel strength, and is more cost-effective than traditional thinners. SUPER THIN is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals – Health Effects.
RECOMMENDED USE:
Designed to reduce viscosity and gel strength. SUPER THIN promotes wall cake breakdown and aids in well completion by breaking up accumulated clays.
CHARACTERISTICS:
- Functions at all pH levels
- Immediate thinning action
- More cost-effective than traditional thinners
- Non-toxic and no heavy metal content
- Reduces gel strength to drop out solids
- Thermally stable in excess of 350°F (177°C)
MIXING & APPLICATION:
DRILLING FLUID THINNER
2 pints per 100 gallons (1 liter per 380 liters) drilling fluid.
DEVELOPEMENT AID
2-4 gallons (7.5-15 liters) pumped into well intake area will promote break-up of wall cake. The well shall be properly flushed and drained before being placed in service.
PACKAGING
45 lb (20.4 kg) pail, 32 per pallet, 55 gallon drum, 4 per pallet, or 278 gallon tote. All pallets are plastic-wrapped.
SUSPEND-IT
SUSPENSION ENHANCER
SUSPEND-IT is an easy mixing biopolymer additive used to control drilling fluid rheology.
RECOMMENDED USE:
Designed to enhance gel strength of the drilling fluid for improved suspension and transporting of drill cuttings, gravel, and cobble on long bores. SUSPEND-IT will perform effectively in fresh or saltwater.
CHARACTERISTICS:
- Easily dispersed in drilling fluids
- Enhances gel strength with little increase of viscosity
- Performs well in fresh and saltwater
- Transports larger cuttings, gravel and cobble easily on long bores
- Improves PV/YP
- Strengthens filter cake and improves bore stability
MIXING & APPLICATION:
Pour slowly through a hopper at maximum shear to avoid lumping and to minimize waste. Add 0.5 to 1 pound per 100 gallons (0.25 to 0.5 kg per 380 liters) of SUSPEND-IT to existing drilling fluid. Dosage scoop included is equivalent to 1/2 lb.
PACKAGING
35 lb (11.3 kg) pail, 36 per pallet. All pallets are plastic-wrapped.
VARIFLO QD
QUICK DISPERSING GUAR GUM
VARIFLO QD is a coarse granular, high-viscosity blend of guar gum formulated for easy and quick dispersion in drilling applications. Coarser granules prevent lumps or encapsulation.
CHARACTERISTICS:
- Biodegradable
- Easy to mix in brackish water
- High viscosity formula
- No lumping while mixing
- Quick dispersing
MIXING & APPLICATION:
Add VARIFLO QD slowly through a jet type mixer. If product is fed too quickly, lumping or balling will occur. Hydrate slowly first 3-10 minutes; follow with rapid hydration for 15-60 minutes. VARIFLO QD should not be poured unmixed into a pit or mixing tank.
FLUID BREAKDOWN:
Chlorine concentrations of 1,000 ppm are recommended to effectively breakdown VARIFLO QD. Approximately 20 gallons (115 liters) of sodium hypochlorite (bleach) or 13 lbs (6 kg) of calcium hypochlorite per 1,000 gallons (3.8 m3) drilling fluid is required.
PACKAGING
25 lb (11.3 kg) pail, 36 per pallet. All pallets are plastic-wrapped.
VERSAFOAM PLUS
HIGH PERFORMANCE DRILLING FOAM
VERSAFOAM PLUS is an ultra high-yielding, biodegradable, liquid foaming agent for use in fresh and saltwater air rotary drilling. VERSAFOAM PLUS is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals – Health Effects.
RECOMMENDED USE:
Dry air rotary drilling or mixed with water for foam drilling.
CHARACTERISTICS:
- Highly concentrated for maximum yield
- Lubricates and cools bit, improving penetration rate
- Mixes easily in fresh or saltwater
- Reduces air-volume requirements
- Reduces hydrostatic pressure
- Reduces water consumption
- Suppresses dust
MIXING & APPLICATION:
DUST SUPPRESSANT
0.5-1 pint air stream (0.25- 0.5 liters) into air stream
MIST DRILLING
1-2 quarts per 100 gallons
(1-2 liters per 380 liters) water
FOAM DRILLING
2-4 quarts per 100 gallons
(2-4 liters per 380 liters) water
CLEAN OUT INSTRUCTIONS
When used in drilling potable water supply wells, blow all foam from the borehole at the end of drilling operations and follow typical well cleanup, development, and sanitation procedures sufficient to remove any remaining foam residue prior to placing the well in service.
PACKAGING
43 lb (19.35 kg) pail, 32 per pallet or 476 lb (214 kg) drum, 4 per pallet. All pallets are plastic-wrapped.